Author：Baby & Adult Diaper Materials FROM：Diaper Materials Manufacturer TIME：2023-02-21
Diapers are divided into styles for infants and adults, mainly composed of surface layer, absorbent core, leak-proof bottom film, etc. The polymer material in the absorbent core absorbs liquid, and at the same time uses superheat distribution to ensure dryness.
In order to increase working hours, reduce the frequency of going to the toilet, and save the use of protective clothing, medical staff will wear diapers to work. Since diapers are mostly of general models, the waist length cannot be adjusted excessively, and some medical staff will feel uncomfortable if they are too tight or loose At the same time, the waistline will change after the meal is completed, and it is inconvenient to adjust the diapers through the protective clothing.
Therefore, it is necessary to invent a diaper frontal tape loop with stable adhesion to solve the above problems.
2. Upgrading of Frontal tape loop
In order to achieve the above purpose, Wang Dongqiu and Xu Anju proposed the following technical scheme: a frontal tape loop of diapers with stable adhesion, including an absorption body, the front and rear sides of the absorption body are respectively provided with a front waistband and a rear waistband, and the front waistband Both sides are provided with a first elastic waist, one end of the first elastic waist is fixedly connected with an adjustment bar, the surface of the adjustment bar is sleeved with an adjustment block, an adjustment device is arranged between the adjustment bar and the adjustment block, the One end of the adjustment block is fixedly connected with a second elastic waist; one end of the second elastic waist is fixedly connected with a connecting hook, and both sides of the rear waistband are provided with cloth patches.
A. This solution is equipped with an adjustment device, which is conducive to the use of diapers with different waist circumferences. The adjustment device changes the length between the front waistband and the back waistband, avoiding multiple adjustments that cause the connection between the hook and the cloth patch. If the fixation is not firm, at the same time, excessively adjust the waistline of the diaper to avoid the situation of being too tight and loose, and it is more comfortable to wear.
B. This solution is equipped with a push device, which is beneficial to change the original waist length of the diaper, and the push device can be pushed to work outside the clothes, which is easy to adjust and avoids discomfort caused by too tight diapers.
Manufacturer Address:Room 1105B, Bld M1, Manhattan, Yulongwan, Shimao, Shuanglong Road, Meiling Street, Jinjiang, Fujian, China