YOUR POSITION：HOME > Products > Non Woven Fabrics >

SSS Hydrophilic Spunbond Non Woven Fabric For Diapers Raw Materials

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Adult Diaper,Baby Diapers,Sanitary Pad
Minimum order quanity: 1000.00 kgs
Packing details: Transparent wrapping film with paper board

Quote
+86-13599104026

Product Description

SSS Hydrophilic Spunbond Non Woven Fabric For Diapers

CATEGORY

Hydrophilic non woven fabric

APPLICATION

Topsheet & wrapping non woven fabric for

economic diapers, pull-ups, sanitary

napkin and under pads.

WIDTH & BASIC WEIGHT

Width 70-3200mm

Basic weight 10-200g/m²

CHARACTERISTIC

Normal soft；

Non woven fabric surface is uniform，Hydrophilic agent is stable, whiteness is good；

The performance is stable, and it is not easy to shrink and wrinkle;

Excellent aging resistance；

ISO & SGS certificate.

USING INSTRUCTION

Using side inside, glue side outside;

Be careful not to damage the non woven fabric when cutting the packaging with a blade;

After the non woven fabric is unpacked, it can be left for a period of time to make the non woven fabric more softer.

PRECAUTIONS

Before using, please pay attention to check

if surface is clean and tidy and whether there is hole and dirt.

TECHNICAL PARAMETERS

(15g/m² non woven fabric)

Item			Unit	Target	Result
Color				White	White
Inner core			mm	76±1	76
Width			mm	120±2	120
Basic weight			g/m2	15±1.5	14.95
Through time			S	1st: ≤2	1.31
				2nd: ≤3	1.85
				3rd: ≤4	2.24
Breaking tension		MD	N/5cm	≥22	31.1
Breaking tension		CD	N/5cm	≥9	16.7
Breaking elongation		MD	%	≥30	95.56
Breaking elongation		CD	%	≥30	116.38
Softness	MD		g	≤2	1.3
Softness	CD		g	≤4.5	2.5
Martindale			level	≥3.5	≥4

Products Categories

Related Products

More》

Related Resource

spunbond non woven hydrophilic non woven non woven for diapers

SSS Hydrophilic Spunbond Non Woven Fabric For Diapers Raw Materials Manufacturing

Fiber/Raw

Material

Preparation

Laying

Bonding

Finishing

Fiber/Raw Material Preparation

Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.

Laying

The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Mosen's laying process mainly consists of dry laying, wet laying, and spin laying.

Bonding

After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.

Finishing

Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.