EN
YOUR POSITION:HOME > Products > Hot Melt Adhesive >

 Elastic glue for baby diaper raw material

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Baby diaper,Adult diaper
Minimum order quanity: 1000.00 kgs
Packing details: cartons packing

Elastic glue features:

Elastic glue, also known as hot melt adhesive or thermoplastic adhesive, is a type of adhesive that is commonly used in the production of baby diapers. 

It is a type of glue that is applied in a molten state and then cooled and solidified to form a strong bond between the various components of the diaper.


Elastic glue is used in the production of baby diapers to attach the elastic leg cuffs and waistbands. 

The glue is applied to the edges of the elastic material and then bonded to the backsheet or other components of the diaper. 

The glue must be strong enough to hold the elastic material in place during use, but it should also be gentle enough to avoid causing irritation or rashes on the skin.


Operating temperature:90-105℃

Storage:Below 40℃, In a cool, dry place

Softening Point:73±2℃

Samples:Free

Shelf life:12 Months in dry and cool environment 

Packing:18kgs/carton, 20kgs/carton

Loading quantity:12tons/20GP by pallets, 24tons/40HQ by pallets.

All the test are lot production averages

 

 

Items

Unit

Requirement

Result

Method

color

light yellow solid

light yellow solid

Visual

Softening point

88-104

97.9

Measurement

Viscosity

cp

3500-5500

4475

 

 

 

Related Resource


 Elastic glue for baby diaper raw material
Related Quality Control
Tensile Test
Tensile Test
The tension tester is used to test the tensile strength of the products, to control the tension is ≥2N in the lateral direction and ≥5N in the longitudinal direction.
Breathability Test
Breathability Test
The breathability of the each Backsheet in the production will be tested by a constant temperature and humidity chamber, and the airflow control error is ±500.
Moisture Detection
Moisture Detection
The moisture of each batch of incoming materials will be tested with a METTLER HS153 moisture analyzer to control the moisture content at ≤0.1%.
We Create the Environment for QC
We Create the Environment for QC
The factory environment is the basis of production. We create a quality environment for the production of disposable hygiene product raw materials, build a fully sealed dust-free workshop, and purchase the most advanced high-speed production equipment.
 Elastic glue for baby diaper raw material
Related Services
Material selection
We will help customers choose the best materials for their needs, based on factors such as comfort, durability, and price.
Material selection
You can visit our factory
What is the service of a diaper spunbond nonwoven factory? 1.Production of spunbond nonwoven materials in various widths, lengths, and gauges. 2.Development and testing of new products to meet customer specifications and industry standards. 3.Qual
You can visit our factory
Quality assurance
Our factory provide quality assurance services to ensure that materials meet specific standards or requirements.
Quality assurance
Non-Woven Fabric Manufacturing
01
Fiber/Raw
Material
Preparation
02
Laying
03
Bonding
04
Finishing
Fiber/Raw Material Preparation
Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
Laying
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Juhua's laying process mainly consists of dry laying, wet laying, and spin laying.
Bonding
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
Finishing
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
Backsheets Manufacturing
01
Prilling
02
Film
Formation
03
Printing
04
Slitting
Prilling
The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.
Film Formation
There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.
Printing
Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.
Slitting
Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.
Related Knowledge
Related FAQ
1.What information do u need for diaper non woven fabric?
Q.What information do u need for diaper non woven fabric? A:You need to provide us non woven type, basic weight, width, function and quantity.
2.What is the upstreaming material for the spunbond non woven fabric ?
Q:What is the upstreaming material for the spunbond non woven fabric ? A: Polypropylene
3.What about the delivery time of PE film when I have my own design ?
Q:What about the delivery time of PE film when I have my own design ? A:Within 15-20 days after receiving deposit.
4.Can I make our design on the release paper?
Q:Can I make our design on the release paper? A:Yes. You can send your design.
5.What is the leadtime of hygiene products raw materials?
7-15 after receiving the deposit.
6.What is your payment terms of baby diaper raw materials?
Q:What is your payment terms of baby diaper raw materials? A:30% deposit in advance and 70% balance before shipment. L/C is acceptable as well.
We offer you disposable hygiene product
raw materials with premium quality.
Cooperate Now

Email: info@juhuascm.com

MP/WhatsApp: +86-13599104026

Manufacturer Address:Room 1105B, Bld M1, Manhattan, Yulongwan, Shimao, Shuanglong Road, Meiling Street, Jinjiang, Fujian, China

NEW KEYWORD

About Us

Products

Information