EN
YOUR POSITION:HOME > Products > Closure System >

PP Side Tape for Baby Diaper Production

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Baby diaper,Adult diaper
Minimum order quanity: 4 rolls
Packing details: cartons packing

PP side tape features:

PP side tape is a common ingredient in the production of baby diapers. PP side tape, also known as polypropylene tape, is a type of adhesive tape that is used to secure the sides of a baby diaper. It is typically made from a thin, flexible material that is designed to be gentle on the skin and provide a secure and comfortable fit. PP side tape is typically applied to the outer layer of a baby diaper, and it helps to ensure that the diaper stays in place and does not come loose during use. Additionally, PP side tape is also designed to be easily removable, which makes it convenient for parents to change their baby's diaper. PP side tape is a commonly used material in the production of disposable baby diapers, and it is a key component in the design of many modern diaper products.

 

Product Detail & Custom Options:

Material: PP/PET

Basic Weight: 125/133/143gsm, customized

Width: 55/60/62mm

Length: 600m/roll Edge

Color: White/green/blue

Inner core diameter: 76mm

Outer diameter: 450mm

180° Peel Off:≥ 11 N/25mm

180° Peel Off from PE:≥8 N/25mm

Tensile Strength:≥40 N/25mm

Application:baby diaper adult diaper

 

Test Method

Test Description

Unit

Result

 

YT-QA-006

Fasten Tape FT

90 °Peel on PP

 

N/25MM

N/25MM

12.75

 

YT-QA-006

Release Tape RT

90 °Peel on PP

 

N/25MM

N/25MM

12.79

 

YT-QA-007

Permanent tape

90 °Peel on PP

90 °Relesae between FT and RT

 

N/15MM

N/25MM

   

 5.74

 0.42

Related Resource


  • Previous: No more
  • Next:No more
PP Side Tape for Baby Diaper Production
Related Quality Control
Tensile Test
Tensile Test
The tension tester is used to test the tensile strength of the products, to control the tension is ≥2N in the lateral direction and ≥5N in the longitudinal direction.
Width Measurement
Width Measurement
In the production process, the PP Side Tape for Baby Diaper Production which is off the slitting machine will be width tested with a tape measure, and width error range should be controled in ≤ 2 mm.
We Formulate a Strict QC Institution
We Formulate a Strict QC Institution
We create a quality environment for the PP Side Tape for Baby Diaper Production. A better environment leads to systematic production of premium quality . In addition, we have set up a special laboratory for quality inspection.
Printing Detection
Printing Detection
The printing online defect detector detects the product printing process of each roller, and the detection accuracy of the ink dot defect is ≥0.1㎡.
PP Side Tape for Baby Diaper Production
Related Services
Quality labeling
We label material on products.
Quality labeling
Materials sourcing
Our upstream raw materials are high-quality materials.
Materials sourcing
You can visit our factory
What is the service of a diaper spunbond nonwoven factory? 1.Production of spunbond nonwoven materials in various widths, lengths, and gauges. 2.Development and testing of new products to meet customer specifications and industry standards. 3.Qual
You can visit our factory
Non-Woven Fabric Manufacturing
01
Fiber/Raw
Material
Preparation
02
Laying
03
Bonding
04
Finishing
Fiber/Raw Material Preparation
Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
Laying
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Juhua's laying process mainly consists of dry laying, wet laying, and spin laying.
Bonding
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
Finishing
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
Backsheets Manufacturing
01
Prilling
02
Film
Formation
03
Printing
04
Slitting
Prilling
The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.
Film Formation
There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.
Printing
Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.
Slitting
Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.
Related Knowledge
Related FAQ
1.What is the leadtime of hygiene products raw materials?
7-15 after receiving the deposit.
2.What's the width of release paper?
Q:What's the width of release paper? A:As your demand.
3.What is your payment terms of baby diaper raw materials?
Q:What is your payment terms of baby diaper raw materials? A:30% deposit in advance and 70% balance before shipment. L/C is acceptable as well.
4.What is the application of SSS spunbond polypropylene hydrophilic non woven fabric?
Q:What is the application of SSS spunbond polypropylene hydrophilic non woven fabric? A:Sanitary napkin topsheet, baby diaper topsheet and adult diaper topsheet.
5.What is the upstreaming material for the spunbond non woven fabric ?
Q:What is the upstreaming material for the spunbond non woven fabric ? A: Polypropylene
6.Can I make our design on the PE film?
Q:Can I make our design on the PE film? A:It is ok and the colors are up to 6 colors.
We offer you disposable hygiene product
raw materials with premium quality.
Cooperate Now

Email: info@juhuascm.com

MP/WhatsApp: +86-13599104026

Manufacturer Address:Room 1105B, Bld M1, Manhattan, Yulongwan, Shimao, Shuanglong Road, Meiling Street, Jinjiang, Fujian, China

NEW KEYWORD

About Us

Products

Information