Hot Air Through ADL Non Woven For Baby Diaper Raw Materials
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Sanitary napkin,Baby diaper,Adult diaper
Minimum order quanity: 1000.00 kgs
Packing details: Paper board with transparent film
Air through nonwoven ADL layer
Specification: 18 GSM to 50 GSM as request
Composition: 100% 6 Denier PE/PP Bicomponent fiber
Color: white, light blue, dark blue, green
Width: 40mm, 60mm or customized
1.The product is with very good uniformity
2.The product is consist of continuous filament, with good tensile strength and elongation
3.Different color to meet the customers' requirement
4.Quick water penetration
5. low wet back
Core inside diameter
3D- Dimensional Thickness
Fluid Penetrating Rate
Roll edge appearance
Neat, Clean, No Obvious Defects
No Obvious Contamination; Free From Foreign Matter
No Obvious Holes / Thin Spots / With Good Formation
Juhua Is Professional Manufacturer Of Hot Air Through ADL Non Woven For Baby Diaper Raw Materials,
We have strong power to support our production, from factory environment
construction to equipment configuration, all leading to high quality products.
Raw materials for hygiene products
High quality& Good Service
Hot Air Through ADL Non Woven For Baby Diaper Raw Materials Related Quality Control
We Create the Environment for QC
The factory environment is the basis of production. We create a quality environment for the production of disposable hygiene product raw materials, build a fully sealed dust-free workshop, and purchase the most advanced high-speed production equipment.
Gram Weight Detection
The weight of the Backsheet of each roller will be measured by a precision electronic balance, and the weight error will be controlled at ±1.5g.
The tension tester is used to test the tensile strength of the products, to control the tension is ≥2N in the lateral direction and ≥5N in the longitudinal direction.
The moisture of each batch of incoming materials will be tested with a METTLER HS153 moisture analyzer to control the moisture content at ≤0.1%.
Hot Air Through ADL Non Woven For Baby Diaper Raw Materials Manufacturing
Fiber/Raw Material Preparation
Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Mosen's laying process mainly consists of dry laying, wet laying, and spin laying.
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
Hot Air Through ADL Non Woven For Baby Diaper Raw Materials Related Services
You can visit our factory
What is the service of a diaper spunbond nonwoven factory? 1.Production of spunbond nonwoven materials in various widths, lengths, and gauges. 2.Development and testing of new products to meet customer specifications and industry standards. 3.Qual
We conduct tests on materials to ensure they meet specific standards or requirements.
Our factory provide quality assurance services to ensure that materials meet specific standards or requirements.
1.Why I need to choose your raw materials?
Q:Why I need to choose your raw materials? A:We are 1. reliable supplier with consistent quality of materials 2. more reasonable prices 3. Best service.
2.What hygiene product raw materials do you provide?
Q:What hygiene product raw materials do you provide? A:baby nappies, baby pull up diapers, adult diapers, baby diapers, wet wipes and other baby care products.
3.What is the basic weight of clothlike film?
Q:What is the basic weight of clothlike film? A:As your demand
4.What is the application of SSS spunbond polypropylene hydrophilic non woven fabric?
Q:What is the application of SSS spunbond polypropylene hydrophilic non woven fabric? A:Sanitary napkin topsheet, baby diaper topsheet and adult diaper topsheet.
5.What is the leadtime of hygiene products raw materials?
7-15 after receiving the deposit.
6.What is your payment terms of baby diaper raw materials?
Q:What is your payment terms of baby diaper raw materials? A:30% deposit in advance and 70% balance before shipment. L/C is acceptable as well.
We offer you disposable hygiene product
raw materials with premium quality.