Juhua Is Professional Manufacturer Of PP Side Tape for Baby Diaper Materials,
We have strong power to support our production, from factory environment
construction to equipment configuration, all leading to high quality products.
By using the same raw materials for each batch of diapers, a manufacturer can ensure consistency in product quality and performance.
Wecan provide technical support and expertise to help diaper manufacturers optimize production processes and improve product quality.
We can produce raw materials to meet specific requirements of the diaper manufacturer, such as different absorbency levels or special designs.
High quality materials
Diaper manufacturers who source their raw materials from top-tier suppliers can offer high-quality diapers that meet the needs of parents and babies.
PP Side Tape for Baby Diaper Materials Related Quality Control
Raw materials for hygiene products
High quality& Good Service
Non-Woven Fabric Manufacturing
Fiber/Raw Material Preparation
Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Juhua's laying process mainly consists of dry laying, wet laying, and spin laying.
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.
There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.
Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.
Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.
PP Side Tape for Baby Diaper Materials Related Services
We will help customers choose the best materials for their needs, based on factors such as comfort, durability, and price.
We conduct inspections of materials to ensure they meet specific standards or requirements.
Our factory obtain certification for their materials to demonstrate compliance with specific standards or requirements.
1.Can I put different raw materials into one container?
Q:Can I put different raw materials into one container? A:Yes, we can and make sure it is full loading to save your cost.
2.What's the width of release paper?
Q:What's the width of release paper? A:As your demand.
3.What about the delivery time of PE film when I have my own design ?
Q:What about the delivery time of PE film when I have my own design ? A:Within 15-20 days after receiving deposit.
4.Could l have my own logo on release paper?
Q:Could l have my own logo on release paper? A:Of course. We are very welcome OEM order, but it need additional cost.
5.What information do u need for diaper non woven fabric?
Q.What information do u need for diaper non woven fabric? A:You need to provide us non woven type, basic weight, width, function and quantity.
6.What is the leadtime of hygiene products raw materials?
7-15 after receiving the deposit.
We offer you disposable hygiene product
raw materials with premium quality.