EN
YOUR POSITION:HOME > Products > Other Products >

Diaper Spandex Material for Baby Diaper

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Baby diaper, Adult diaper
Minimum order quanity: 1000.00 kgs
Packing details: Carton packing

Diaper spandex characteristics:

1. a kind of elastic material used to provide stretch ability to the legs and to the cuff of baby diapers.
2. non-toxic and does no harm to users' skin.
3. eco-friendly and can endure erosion.
4. used as adult diaper raw materials with strong stretch capacity and surprising recovery effect.


Tips: The role of spandex in Disposable diapers

1. Spandex is used to improve the fit of adult diapers, usually made of polyurethane or polyester foam, synthetic rubber or Lycra® (also known with the generic name Spandex).
2. Spandex is used in cuffs, for the waist and the legs; spandex can also be used as lateral side panels and in tape construction. Most gasketing cuffs use spandex to provide a seal with the user's legs.
3. Spandex can stretch as much as 400% of its original length before it breaks, however it is typically used at less than 300% stretch.

       Product  Name  Diaper Spandex Material for Baby Diaper

 

Diaper Spandex

Material

natural rubber, synthetic rubber and elastane fiber

Denier 

490D/560D/620D/720D and as required

Inner core diameter

76mm

Color

White, Light blue,Orange

Tenacity at Break

580 CN

Elongation at Break

1090%

Stress at Elongation 300%

65CN

Elastic recovery percent at elongation 300%

98%

Loading quantity

15 tons/40HQ

FUNCTION:

·         Elastic material spplies in leg cuffs and leackage stand of diapers and ladis'napins

·         Spandex brings to the users more formfitting, more comfortable,less leakage,and no skin irritant


Application Industry
Our safe and stable products are widely applied in the field of disposable hygiene products and are used to make products that are not limited to the following:
Know More about Applications
Our Certifications
Disposable Non woven Fabric SGS Testing Report
SSS Non woven Fabric SGS Testing Report
PP Non woven SGS Testing Report
Non woven Polypropylene SGS Testing Report
Non woven Fabric Roll SGS Testing Report
Non woven Fabric SGS Testing Report
ISO ENVIRONMENTAL MANAGEMENT SYSTEM CERTIFICATE OF NON WOVEN FABRIC PRODUCTION
ISO QUALITY MANAGEMENT SYSTEM CERTIFICATE OF NON WOVEN FABRIC PRODUCTION
ISO OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEM CERTIFICATE OF NON WOVEN FABRIC PRODUCTION
Diaper Spandex Material for Baby Diaper
Manufacturer Advantage
Raw materials
for hygiene products
Win-Win benefit
Mix loading
High quality&
Good Service
JUHUA offers a wide range of products and services in the field of disposable hygiene product raw materials, which are all optimally tailored to your requirements to meet the practical needs.
We provide our clients with cost-effective quality Diaper Spandex Material for Baby Diaper, to improve the competitiveness of our clients' products in the market, reduce the losses caused by raw materials and obtain more benefits. These are the basis for our long-term cooperation, mutual trust, and win-win benefit.
We will help clients to calculate the raw materials quantity monthly, mixing all items with full loading, save cost and save time.
Dedicated to strict quality control and clients service, our experienced staff members are always available to discuss your requirements and ensure full clients satisfaction.
Diaper Spandex Material for Baby Diaper
Quality Assurance
We Create the Environment for QC
The factory environment is the basis of production. We create a quality environment for the production of disposable hygiene product raw materials, build a fully sealed dust-free workshop, and purchase the most advanced high-speed production equipment.
A better environment leads to systematic production of premium quality Diaper Spandex Material for Baby Diaper.
Excellent QC Talents Work with Us
JUHUA is equipped with a professional quality inspection team for the inspection of production of disposable hygiene product raw materials.
All quality inspectors have to have had more than 3 years’ experience. The pursuit of quality is not only the goal of the entire enterprise, but also the requirements of quality inspection experts in their personal work.
We Formulate a Strict QC Institution
We have developed clear instructions for production. In all production steps, employees are required to produce in strict accordance with the regulations to ensure the quality of the The factory environment is the basis of production. We create a quality environment for the Diaper Spandex Material for Baby Diaper.
A better environment leads to systematic production of premium quality .
In addition, we have set up a special laboratory for quality inspection, and the standard of product compliance is accurate to the numerical value.
Diaper Spandex Material for Baby Diaper
Quality Control Highlights
Moisture Detection
The moisture of each batch of incoming materials will be tested with a METTLER HS153 moisture analyzer to control the moisture content at ≤0.1%.
Gram Weight Detection
The weight of the Backsheet of each roller will be measured by a precision electronic balance, and the weight error will be controlled at ±1.5g.
Breathability Test
The breathability of the each Backsheet in the production will be tested by a constant temperature and humidity chamber, and the airflow control error is ±500.
Tensile Test
The tension tester is used to test the tensile strength of the products, to control the tension is ≥2N in the lateral direction and ≥5N in the longitudinal direction.
Printing Detection
The printing online defect detector detects the product printing process of each roller, and the detection accuracy of the ink dot defect is ≥0.1㎡.
Width Measurement
In the production process, the Diaper Spandex Material for Baby Diaper which is off the slitting machine will be width tested with a tape measure, and width error range should be controled in ≤ 2 mm.
Non-Woven Fabric Manufacturing
01
Fiber/Raw
Material
Preparation
02
Laying
03
Bonding
04
Finishing
Fiber/Raw Material Preparation
Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
Laying
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Juhua's laying process mainly consists of dry laying, wet laying, and spin laying.
Bonding
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
Finishing
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
Backsheets Manufacturing
01
Prilling
02
Film
Formation
03
Printing
04
Slitting
Prilling
The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.
Film Formation
There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.
Printing
Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.
Slitting
Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.
Diaper Spandex Material for Baby Diaper
Related Cases
Customers' satisfaction is our pursuit.
FAQ
1.What is the leadtime of Diaper Spandex Material for Baby Diaper?
7-15 after receiving the deposit.
2.Can I make our design on the backsheet?
It is ok and the colors are up to 6 colors.
3.Why I need to choose your material?
We are 1. reliable supplier with consistent quality of materials 2. more reasonable prices 3. Best service.
4.Can I put different materials into one container?
Yes, we can and make sure it is full loading to save your cost.
5.Can I send you some of my products to ship with my container?
Yes sure, we can help and load in the right way.
6.Can you help me to design for backsheet?
Yes, we have a professional team for perfect design, and it is free.
We offer you disposable hygiene product
raw materials with premium quality.
Cooperate Now

Email: info@juhuascm.com

MP/WhatsApp: +86-13599104026

Manufacturer Address:Room 1105B, Bld M1, Manhattan, Yulongwan, Shimao, Shuanglong Road, Meiling Street, Jinjiang, Fujian, China

NEW KEYWORD

About Us

Products

Information