YOUR POSITION：HOME > Products > Non Woven Fabrics >

Spunlace Non Woven Fabric Roll For Wet Wipe Raw Materials

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Wet wipes
Minimum order quanity: 1000.00 kgs
Packing details: Transparent wrapping film with paper board

Quote
+86-13599937366

Product Description

Spunlace non woven fabric features:

1. Spunlace non woven fabric is made by viscose and polyester.

2.Spunlace non woven fabric can be cross type or parallel type.

3.Spunlace non woven fabric can be plain or dot.

4.Application:wet wipes raw materials

5.Loading quantity:9-10 tons/40HQ

6.Introduction of spunlace non woven

Spunlace non woven fabric is to spray high-pressure fine water flow onto one or more layers of fiber webs, so that the fibers are entangled with each other, so that the fiber web is reinforced and has a certain strength, and the obtained fabric is spunlace non woven fabric.

7.Processing principle

The web is sprayed with multiple fine water jets generated by high pressure. After the water jet passes through the fiber web, it is rebounded by the dragged net curtain and penetrates the fiber web again. As a result, the fibers in the fiber web are displaced, interspersed, entangled and cohesive under the hydraulic action of the high-speed water jets in different directions. The fiber web is thereby reinforced.

DESCRIPTION OF SPUNLACE NON WOVEN FABRIC
Technology	Spunlace, Hydroentanglement, Water-jet
Web Forming	Parallel lapping, Cross lapping
Composition	Viscose (Rayon)+Polyester (PET) (+ES), Bamboo, PLA, Cotton, Woodpulp+PP/PET/Viscose, etc.
Specific Ratio	Customized
Structure	Plain, Mesh(perforated, apertured, hole), Dot Embossed, Jacquard, EF, Herring Bond
Printing	Wave line, Diamond, Dyed, as customized
Color	White, Green, Blue, etc.
Width	6-320cm
Weight	25-100gsm
Roll Length	500-3,000 meters
Converting	In roll, Folded sheet, Perforated roll, Jumbo roll, etc.
Characteristics	Customized as the application and requirements, some characteristics as follow: 1. Flushable, good dispersibility 2. Washable, long-lasting 3. Soft touch, excellent breathability 4. Eco-friendly, biodegradable 5. Super absorbent 6. Good tensile strength
Package	PE film, Shrink film, Poly bag, Opp bag, Carton, as requirement.
Application	Beauty care, Medical care, Wipes, Diapers, Sanitary napkins, Alcohol swab, Toilet wipes, more...

Products Categories

Related Products

More》

Related Cases

More》

Related Resource

spunlace non woven fabric spunlace non woven fabric price wet wipe raw materials

Spunlace Non Woven Fabric Roll For Wet Wipe Raw Materials Manufacturing

Fiber/Raw

Material

Preparation

Laying

Bonding

Finishing

Fiber/Raw Material Preparation

WEIHONGLAI's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.

Laying

The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Mosen's laying process mainly consists of dry laying, wet laying, and spin laying.

Bonding

After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. WEIHONGLAI's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.

Finishing

Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at WEIHONGLAI can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.