YOUR POSITION：HOME > Products > Non Woven Fabrics >

Legcuff SMMS non woven fabric diaper raw material

Price:negotiable
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Baby diaper, Adult diaper, Sanitary napkin
Minimum order quanity: 1000.00 kgs
Packing details: Transparent wrapping film with paper board

Quote
+86-13599104026

Product Description

Legcuff SMMS non woven fabric fabric features:

1. Legcuff SMMS non woven fabrics (Spunbond + Meltblown + Meltblown + Spunbond Nonwovens), basic weight range: 10-100 gsm; width: 90mm-3200mm; it belongs to composite non woven fabrics, which is the extension of SMS non-woven fabric.

2. Polypropylene is the key component of the sterile quality of SMMS non woven fabrics.

3.It is water proof nonwoven.

4.Basic weight is around 10gsm-18gsm for diaper legcuff.

5.Color can be white color, blue color and green color.

6.Application:sanitary napkin, baby diaper and adult diaper legcuff.

7.Loading quantity:5 tons/20GP, 11-12 tons/40HQ

Legcuff SMMS non woven fabric, so far there are still many customers who are not very clear about its production process and principle. Here, the editor will briefly introduce to you. The so-called SMMS non woven fabric is the upper and lower layers of spunbond non-woven fabrics. There are two layers of melt-blown non-woven fabric sandwiched in the middle. That is, four layers of composite cloth. s is the abbreviation of spunbond cloth, m is the abbreviation of meltblown cloth, so I believe everyone will understand it.

Items		Unit	Requirement	Result
Color			White	white
Core inside diameter		mm	76±1	76
Roll slit width		mm	115±2	115
Basis weight		g/m²	15±1.5	14.96
Breaking tension	MD	N/5cm	≥23	28.36
	CD		≥11	11.33
Breaking elongation	MD	%	∕	91.22
	CD		∕	76.32
Hydrosatic Pressure		pa	≥140	195.3
Others		Wrinkles/ corrugation	None
		Splices	None
		Roll edge appearance	Neat, Clean, No Obvious Defects
		Contamination	No Obvious Contamination; Free From Foreign Matter
		Holes/Thin spots/Formation	No Obvious Holes / Thin Spots / With Good Formation

Material was suitable to use in hygiene product.

Products Categories

Related Products

More》

Related Resource

Legcuff SMMS non woven fabric SMMS non woven fabric Legcuff SMMS non woven fabric price diaper raw material

Legcuff SMMS non woven fabric diaper raw material Manufacturing

Fiber/Raw

Material

Preparation

Laying

Bonding

Finishing

Fiber/Raw Material Preparation

Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.

Laying

The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Mosen's laying process mainly consists of dry laying, wet laying, and spin laying.

Bonding

After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.

Finishing

Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.