Diaper Making Material,Sanitary Napkin Pad Manufacturing Raw Materials Manufacturers & Suppliers In Bangladesh
Delivery time: 15-20 days after receiving deposit or LC.
Payment terms: TT/LC/DP
Application: Adult Diaper,Baby Diapers,Sanitary Pad
Minimum order quanity: 1000.00 kgs
Packing details: Transparent wrapping film with paper board
JUHUA export diaper making materials ADL non woven fabric to Bangladesh customer.
ADL non woven fabric can be called Acquisition Distribution Layer ADL, It is a kind of hot air non woven fabric, made by ES fabric.
There are some advantages of ADL non woven fabric,
1.Different color to meet the customers' requirement, such as white, green and blue.
2.Quick water penetration
3. low wet back
ADL non woven fabric is used for baby diapers, adult diapers ,sanitary napkin.
Why Choose Our Sanitary Napkin Raw Materials In Bangladesh
We have strong power to support our production, from factory environment
construction to equipment configuration, all leading to high quality Sanitary Pad Material.
1.70000 square meters Covering Factories
We have two factories producing non woven fabrics and backsheets, covering a total of more than 70000 square meters.
2.ISO Qualified Plants
Our production workshops are fully sealed, dust-free workshops that are in strict compliance with the ISO9001 standard.
3.High-speed & Flexography Equipment
We have equipped advanced high-speed production equipment to ensure efficient production from printing to compounding and slitting.
4.JUHUA Quality Control
From raw material purchase to finished product inspection, and to the final packaging delivery, we take multiple tests to control the quality of raw materials, which aims to ensure that your disposable hygiene products can be trusted by customers in the market.
Juhua Bangladesh Diaper Material Related Certifications
Baby Diaper & Sanitary Pad Materials In Bangladesh Manufacturer Advantage
Raw material for hygiene products
High quality& Good Service
JUHUA offers a wide range of products and services in the field of disposable hygiene product raw materials, which are all optimally tailored to your requirements to meet the practical needs.
We provide our clients with cost-effective quality Sanitary Pad Manufacturing Raw Material, to improve the competitiveness of our clients' products in the market, reduce the losses caused by raw materials and obtain more benefits. These are the basis for our long-term cooperation, mutual trust, and win-win benefit.
We will help clients to calculate the Diaper manufacturing materials quantity monthly, mixing all items with full loading, save cost and save time.
Dedicated to strict quality control and clients service, our experienced staff members are always available to discuss your requirements and ensure full clients satisfaction.
Adult & Baby Diaper Material In Bangladesh Quality Control Highlights
The moisture of each batch of incoming materials will be tested with a METTLER HS153 moisture analyzer to control the moisture content at ≤0.1%.
Gram Weight Detection
The weight of the Backsheet of each roller will be measured by a precision electronic balance, and the weight error will be controlled at ±1.5g.
The breathability of the each Backsheet in the production will be tested by a constant temperature and humidity chamber, and the airflow control error is ±500.
The tension tester is used to test the tensile strength of the products, to control the tension is ≥2N in the lateral direction and ≥5N in the longitudinal direction.
The printing online defect detector detects the product printing process of each roller, and the detection accuracy of the ink dot defect is ≥0.1㎡.
In the production process, the product which is off the slitting machine will be width tested with a tape measure, and width error range should be controled in ≤ 2 mm.
Bangladesh Diaper Making Material Nonwoven Manufacturing
Fiber/Raw Material Preparation
Juhua's choice of raw material is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven material. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Mosen's laying process mainly consists of dry laying, wet laying, and spin laying.
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
Bangladesh Diapers & Sanitary Napkin Material Related Video