Juhua Is Professional Manufacturer Of Perforated Film For Sanitary Pad Raw Materials,
We have strong power to support our production, from factory environment
construction to equipment configuration, all leading to high quality products.
A reliable supplier ensures that there is always a steady supply of raw materials, which avoids delays in production and keeps manufacturing lines running smoothly.
We provide our clients with cost-effective quality Perforated Film For Sanitary Pad Raw Materials, to improve the competitiveness of our clients products in the market, reduce the losses caused by raw materials and obtain more benefits.
Research & Development
We are often at the forefront of research and development, providing new materials that can improve diaper performance or reduce environmental impact.
Raw materials for hygiene products
JUHUA offers a wide range of products and services in the field of disposable hygiene product raw materials, which are all optimally tailored to your requirements to meet the practical needs.
Perforated Film For Sanitary Pad Raw Materials Related Quality Control
Raw materials for hygiene products
High quality& Good Service
Non-Woven Fabric Manufacturing
Fiber/Raw Material Preparation
Juhua's choice of raw materials is based on processability and the ultimate performance requirements of the fibre web. Fiber is the basis for all nonwoven materials. Most natural and chemical fibers can be used in nonwoven materials. In addition, we also use high-quality adhesives and finishing chemicals, which can bond the fibers in the web to each other to obtain a web with a certain strength and integrity.
The process of forming fibres into a loose fibrous web is called laying. The reduced web strength at this time is very low, and the fibers in the web may be staple fibers or continuous filaments, depending mainly on the process of forming the web. Juhua's laying process mainly consists of dry laying, wet laying, and spin laying.
After the fiber web is formed, the reinforcement of the loose fibers held by the fiber web by the related process is called bonding, which gives the fiber web certain physical and mechanical properties and appearance. Juhua's bonding process includes mechanical, thermal, chemical, stitch bonding, etc.
Finishing is carried out after the bonding. Finishing is designed to improve the structure and feel of the product, and sometimes to change the properties of the product, such as breathability, absorbency and protection. Finishing methods at Juhua can be divided into two categories: mechanical methods and chemical methods. Mechanical post-treatment includes creping, calendering, shrinking, perforating, and the like. Chemical finishing includes dyeing, printing and functional finishing.
The granulation process is to grind the purchased calcium carbonate and polystyrene, and after drying and adding an adhesive, the particles having good fluidity and a particle diameter of about 0.1 mm are prepared. This process can make the final product more filling, firm and more detailed.
There are three steps in this process: the first step is to liquefy the raw material through a temperature of 250 degrees and shape it through cooling rolls; the second step is to preheat and then stretch and control the amount of gas permeability; the third step is to roughen the surface of the film by corona treatment, which is advantageous for ink adhesion.
Juhua's products are all produced with food-grade environmentally-friendly water-based inks and advanced and efficient flexo presses. The products produced will not have any odor at all, completely eliminating the market complaints of consumers' most sensitive diaper odor residues. The color registration is accurate. We can produce up to 6 color positioning and cutting gas permeable membranes.
Juhua uses a high-speed stable, precise edge-cutting slitter. During the slitting, the staff confirms the quality status of each product according to the process card, rejects the abnormality, and inputs the processing result into the slitting process card to ensure that the products transferred into the package are qualified.
Perforated Film For Sanitary Pad Raw Materials Related Services
Our upstream raw materials are high-quality materials.
You can visit our factory
What is the service of a diaper spunbond nonwoven factory? 1.Production of spunbond nonwoven materials in various widths, lengths, and gauges. 2.Development and testing of new products to meet customer specifications and industry standards. 3.Qual
Our factory obtain certification for their materials to demonstrate compliance with specific standards or requirements.
1.Can I make our design on the PE film?
Q:Can I make our design on the PE film? A:It is ok and the colors are up to 6 colors.
2.What is the upstreaming material for the spunbond non woven fabric ?
Q:What is the upstreaming material for the spunbond non woven fabric ? A: Polypropylene
3.What hygiene product raw materials do you provide?
Q:What hygiene product raw materials do you provide? A:baby nappies, baby pull up diapers, adult diapers, baby diapers, wet wipes and other baby care products.
4.What's the width of release paper?
Q:What's the width of release paper? A:As your demand.
5.How many tons hydrophilic spunbond non woven fabric can be loaded in one 40HQ ?
Q:How many tons hydrophilic spunbond non woven fabric can be loaded in one 40HQ ? A:We can load 12 tons hydrophilic spunbond non woven fabric.
6.Why I need to choose your raw materials?
Q:Why I need to choose your raw materials? A:We are 1. reliable supplier with consistent quality of materials 2. more reasonable prices 3. Best service.
We offer you disposable hygiene product
raw materials with premium quality.